MG 20×80

$95.12

This MiniGrip gripper has a 12mm thick foam (2 layers of 6mm each), measures 20mm x 80mm and is available in a regular and high flow orifice versions. Choose regular flow to limit vacuum loss when using multiple Minigrips with a single vacuum source or if it is likely that a portion of the gripper will be off the part and ports will be exposed. Choose a high flow design when handling high porosity materials.

 

How To Order

1. Review model options from performance specification in the Select Model tab below
2. Select the desired “model” from drop down list
3. Select options if applicable. (Price and photo will update when applicable)
4. Select “quantity” from drop down list
5. Select “add to cart”
6. Complete your purchase

Clear
SKU: N/A Categories: ,

The table below lists the performance specifications for the MG 20X80 foam gripper.
Note that the values below were obtained at a 80% vacuum level.

Model NumberMaterial TypeHolding Force lbs (N) for 70% Vacuum
MG 20X80Non-Porous (steel)3.5 (16)
Semi-Porous (wood)3.1 (14)
Porous (cardboard)2.6 (12)
* Holding force is based on gripper being fully covered. Safety factor of 2 already applied.
These grippers will function with 80% coverage.