Choose Robot Side
Choose Tool side

Select the tool side that best fits your application.  

Millibar has developed many tool sides for other applications. Please browse our portfolio or contact us for a custom tool side.

MTCAE-UR

Tool side with ISO 9409-1-50-4-M6 Mounting Pattern, Replicates UR Wrist Geometry. Complete with 2 pneumatic pass-throughs (6mm OD tubing) and 8 pin Pico connector.

Select
MTCAE-UR
MTC-UR

MTCAE-BP

Blank tool side for custom modification. Complete with 2 pneumatic pass-throughs (6mm OD tubing) and 8 pin Pico connector.

Select
MTCAE-BP
MTC-BP

MTCAE-M6

Tool side accepts 4 M6 SHCS. Ideal for use with aluminum profiles that accept 6mm or 1/4” fasteners. Complete with 2 pneumatic pass-throughs (6mm OD tubing) and 8 pin Pico connector.

Select
MTC-M6
MTCAE-M6

MTCAE-M8

Tool side accepts 4 M8 SHCS. Ideal for use with aluminum profiles that accept 8mm or 5/16” fasteners. Complete with 2 pneumatic pass-throughs (6mm OD tubing) and 8 pin Pico connector.

Select
MTC-M8
MTCAE-M8

MTCAE-FG

Tool side accepts 4 M4 SHCS for use with FlexiGrip foam vacuum grippers. Complete with 2 pneumatic pass-throughs (6mm OD tubing) and 8 pin Pico connector. 

Select
MTC-FG
MTC-FG

MTC-STYLUS-6

Tool side with 6” Stylus for external camera-robot calibration and locating hole centers.

Select
MTC-STYLUS-6
MTC-STYLUS-6

MTCAE-40

Tool side with ISO 9409-1-40-4-M6 Mounting Pattern. Complete with 2 pneumatic pass-throughs (6mm OD tubing) and 8 pin Pico connector.

Select
MTCAE-40
MTC-40

MTCAE-315

Tool side with ISO 9409-1-31.5-4-M5 Mounting Pattern. Complete with 2 pneumatic pass-throughs (6mm OD tubing) and 8 pin Pico connector.

Select
MTCAE-315
MTC-315

Need A Custom Tool Side?