Custom Tool Sides
Project to Product
Millibar can deliver custom tool sides for your end-of-arm tools that are designed specifically for your project which saves weight and space.
Custom doesn't have to be expensive or take a lot of time. Depending on complexity, we will turn around designs and completed modifications quickly, typically within 24 hours.
Easily attach and detach Pick-It 3D Calibration Plate for faster vision integration.
Allegro Hand Gripper requires custom tool plate and extension for full range of motion of the thumb.
Starting with a blank tool side, MTC-BP, Millibar printed a lightweight carbon fiber extension to accept the mounting screws from the Allegro Hand mounting plate.
Quickly deploy all models of the Piab KVG series foam grippers when handling a varioety of product sizes and shapes.
Low Profile series tool side with carbon fiber adapter plate for mounting Piab KVG Series foam grippers.
Provide compressed air to a Piab KVG Gripper and have a return vacuum line for vacuum level monitoring off-wrist using the Utility Series tool side. Easily change tools without disconnecting plumbing or electrical connections.
Combination custom adapter plate with Utility Series tool side (MTCAE-M8) with dual pneumatic pass-throughs and 8 pin Pico connector provides all necessary utilities to control the Piab KVG foam gripper.
Modified Low Profile series blank tool side for SMC pneumatic parallel gripper.
Starting with a standard low profile series blank plate, MTC-BP, Millibar modified it to add the bolt pattern on the SMC gripper.
Rapidly deploy your Hiwin gripper with low profile tool side and custom adapter plate.
Low profile tool side (MTC-M6) with custom carbon fiber adapter plate.
Mount a Piab VGS3010 vacuum gripper on the centerline of your robot.
Custom low profile tool side to mount to 4 threaded holes on the top surface of the Piab VGS3010.
Send compressed air to power this Piab VGS3010 through the 1st channel of the dual pneumatic pass through. Send a second compressed air line through channel 2 to provide a blow off for fast part release and accurate part placement.
Custom mounting pattern to match Piab VGS3010 vacuum gripper starting with a MTCAE-BP blank Utility Series tool side.